How To Set Up Roomba I3

iRobot i3 / i4 Roomba Robot Vacuum

Safe Data

Important Safety Information

This owner'southward guide includes information for Regulatory Model(due south): RVD-Y1. SAVE THESE INSTRUCTIONS

Warning: When using an electrical appliance, bones precautions should always exist followed, including the following:

READ ALL INSTRUCTIONS

WARNING: To reduce the risk of injury or impairment, read and follow the prophylactic precautions when setting upwardly, using and maintaining your robot. This apparatus can be used by children anile from 8 years and above and persons with
reduced concrete, sensory or mental capabilities or lack of feel and knowledge if they have been given supervision or teaching concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall non be made by children without supervision.

This is the safety alert symbol. It is used to alarm you to potential concrete injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Warning: Indicates a hazardous situation that, if not avoided, could outcome in death or serious injury.
CAUTION: Indicates a hazardous situation that, if non avoided, could event in small or moderate injury.
Notice: Indicates a hazardous situation that, if not avoided, could result in belongings damage.

General

• Your robot is non a toy. Small children and pets should be supervised when your robot is operating.
• Do not sit or stand on your robot or Home Base™.
• Do not utilize unauthorized chargers. Apply of an unauthorized charger could cause the battery to generate oestrus, smoke, take hold of burn, or explode.
• Your robot comes with a region approved ability supply cord and is designed to exist plugged into a standard household AC ability outlet only. Do not apply any other power supply cord. Forreplacement cords, please contact Customer Care to ensure
  proper selection of country specific ability supply cord.
• Do not open up your robot or Home Base™. There are no user serviceable parts inside. Refer servicing to qualified service personnel.
• Take chances of electric stupor, use indoors in dry location but.
• Do not handle your robot or Home Base™ with moisture easily.
• Store and operate your robot in room temperature environments merely.
• If the room to exist cleaned contains a balcony, a physical barrier should be used to forbid access to the balcony and ensure prophylactic operation.
• Make clean cliff sensors for buildup.

CAUTION

• Do not operate the robot in areas with exposed electrical outlets in the flooring.
• If the device passes over a power string and drags information technology, at that place is a chance an object could be pulled off a table or shelf. Before using this device, pick upwardly objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any frail objects.
• Exist aware that the robot moves on its own. Accept care when walking in the area that the robot is operating in to avoid stepping on information technology.
• Exercise non use this device to pick up abrupt objects, glass, or annihilation that is called-for or smoking.

Observe

• This robot is intended for dry floor employ but. Do not use this device to pick upward spills. Do not let your robot or Home Base™ to get wet.
• Do not identify anything on top of your robot.
• The failure to maintain cleanliness of charger contacts could result in loss of ability for the robot to charge the battery.

Domicile BASE
WARNING

• Do not utilise a Home Base of operations™ with a damaged cord or plug if the cord or plug is damaged, it must be replaced.
• Ever disconnect your robot from the Dwelling Base™ before cleaning or maintaining it.
• Accuse your robot only with the power supply provided. The provided power supply delivers safety extra low voltage corresponding to the input marker on the robot which is required to maintain prophylactic functioning.
• To prevent the hazard of your robot falling downstairs, ensure that the Domicile Base of operations™ is placed at least four feet (ane.2 meters) away from stairs.

NOTICE

• Product may not exist used with whatsoever type of power converter. Use of ability converters will immediately void the warranty.
• If you alive in an area prone to electrical storms, it is recommended that y'all use additional surge protection. Your Abode Base™ may be protected with a surge protector in the event of severe electric storms.

BATTERY
WARNING

• Do non open, beat out, estrus above 176°F: fourscore°C, or incinerate. Follow manufacturer's instructions.
• Exercise not brusque-circuit the bombardment past allowing metallic objects to contact battery terminals or immerse in liquid. Do not subject area batteries to mechanical daze.
• Periodically audit the bombardment pack for any sign of damage or leakage. Exercise non charge damaged or leaking battery packs, do non allow the liquid to come up in contact with skin or optics. If contact has been made, wash the affected surface area with copious amounts of water and seek medical advice. Identify the battery in a sealed plastic pocketbook and recycle or dispose of safely according to local environmental regulations, or return it to your local authorized iRobot Service Middle for disposal.
• Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations. If you need to ship this product (with the battery included) for service, travel or any other reason, you lot MUST encounter the Troubleshooting department of your transmission or contact customer treat shipping instructions.

CAUTION
Battery usage by children should be supervised. Seek medical advice immediately if a cell or a battery has been swallowed

NOTICE

• The bombardment pack must be removed from the robot before recycling or disposal.
• For best results, only use the iRobot Lithium Ion Battery that comes with the robot.
• Do non use non-rechargeable batteries. Apply only the rechargeable battery supplied with the product. For replacement, purchase identical iRobot bombardment or contact iRobot Customer Intendance for alternative battery options.
• Always charge and remove the battery from your robot and accessories soon-term storage.

For battery recycling become to call2recycle.org; or phone call 1-800-822-8837

Virtually your Roomba® Robot Vacuum

Top View

Buttons & Indicators

Using Your Roomba® Robot Vacuum

Positioning the Dwelling house BaseTM Charging Station

Warning: To foreclose the risk of your robot falling downstairs when it is leaving from or returning to the Home Base of operations™, ensure that the Home Base of operations™ is placed at to the lowest degree 4 feet (1.2 meters) away from stairs.
Download the iRobot HOME App and connect to Wi-Fi®

• Follow stride-by-step instructions to set up upward your Roomba.
• Ready an automatic cleaning schedule and customize cleaning preferences.
• Access to tips, tricks, and answers to commonly asked questions.

Charging

• Identify the robot on the Dwelling house Base of operations™ to activate the battery.
  Note: Your robot comes with a fractional charge, but we recommend that you charge the robot for 3 hours prior to starting the starting time cleaning job.
• If your robot needs to recharge mid-cleaning, it volition return to its Home Base of operations™. Once it is sufficiently charged, information technology will then resume the cleaning job where it left off.
• The robot uses a small amount of power whenever it is on the Dwelling house Base of operations™. You lot tin put the robot in a farther-reduced power state when not in use. For instructions and more than details on this Reduced Power Standby Mode, refer to the iRobot HOME App.
• For long-term storage, turn off the robot by removing it from the Home Base™ and holding downwards for 10 seconds. Store the robot in a cool, dry place.

Cleaning

Remove excess clutter from floors earlier cleaning. Employ your robot oft to maintain well-conditioned floors.

• Your robot will automatically explore and clean your home. It volition return to the Domicile Base™ at the stop of a cleaning job and whenever it needs to recharge.
• To send the robot dorsum to its Domicile Base™, tap . A blue calorie-free band blueprint will bespeak that the robot is seeking the Home Base™.
• When your robot detects an especially dirty expanse, it will go into Dirt Discover™ mode, moving over the area multiple times until it senses that the area has been sufficiently cleaned. The low-cal band indicator will flash blue.
• Tap to spot clean a designated area. The robot will screw outward about 3 feet (1 meter) and so screw inward to end where information technology started. The light band indicator will show a blue spiral.

Troubleshooting

• Your robot volition tell y'all something is incorrect by playing an sound alert and turning the low-cal band indicator reddish. Press CLEAN for details. Further support and instructional videos are available in the iRobot Home App.
• If you are unsure if the robot is finished or paused, consult the iRobot Home App to check on its status.

Bombardment Safety & Shipping
For best results, simply use the iRobot Lithium Ion Battery that comes with your robot.
WARNING: Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations. If you demand to send this production for service, travel or whatsoever other reason, you MUST follow the below shipping instructions.

• Bombardment MUST exist turned off earlier shipping.
• Turn off the battery by removing the robot from the Home Base™ and holding downward for 10 seconds. All indicators will turn off.
• Package the robot securely for aircraft.
• If you lot need further assistance, contact our Customer Care team or visit global.irobot.com.

Accessories

Dual Way Virtual Wall® Barrier*
Note: For best results, place at least viii feet (2.5 meters) from the Home Base ™.
Apply the Dual Manner Virtual Wall® barrier to go on the robot in the places you want cleaned — and out of the ones you don't. It creates an invisible barrier that only the robot can see. You can exit the device in position betwixt cleanings.

Choose the mode to see your needs:
Virtual Wall Mode: When the switch is in the Virtual Wall position ( ), the device will create a linear barrier to block openings up to 10 feet (3 meters).

Note: This barrier gets wider as information technology gets farther from the device (refer to analogy).

Halo Mode: Toggle the switch to the Halo position ( ), to create a circular bulwark. This volition prevent the robot from approaching zones you lot desire to protect such as a pet bowl, vase, or under a desk. The Halo barrier extends approximately 12 inches (thirty centimeters) from the center of the device.

Note: The batteries volition final about 8-10 months nether normal utilise. If you lot are not planning to utilise your Virtual Wall barrier for an extended flow of time, exist sure to plow the switch to the Off, or middle position.

Care and Maintenance

Care and Maintenance Instructions
To proceed your robot running at peak functioning, perform the procedures on the following pages. There are additional instructional videos in the iRobot Dwelling house App. If you lot notice the robot picking up less droppings from your floor, empty the bin, clean the brushes, and clean or supervene upon the filter if needed.

Office	Intendance Frequency	Replacement Frequency*
Bin	Wash bin equally needed
Filter	Clean once a week (twice a calendar week if you have a pet). Do not wash.	Every two months
Full Bin Sensor	Clean every ii weeks
Front Pulley Bicycle	Clean every 2 weeks	Every 12 months
Border-Sweeping Brush and Multi-Surface Brushes	Clean once a month (twice a month if you accept a pet)	Every 12 months
Sensors and Charging Contacts	Clean one time a month

Annotation: iRobot manufactures diverse replacement parts and assemblies. If you think you need a replacement function, please contact iRobot Customer Care for more data. * Replacement frequency may vary. Parts should be replaced if visible wear appears.

Emptying the Bin

Cleaning the Filter

Cleaning the Full Bin Sensors

Washing the Bin

Important: Do not wash the filter. Remove the filter earlier washing the bin.

Cleaning the Border-Sweeping Castor

1. Use a small screwdriver to loosen the screw holding the Edge-Sweeping Brush in place.
2. Pull to remove the Border-Sweeping Brush. Remove any hair or debris, so reinstall the castor.

Cleaning the Front end Pulley Wheel

1. Pull firmly on the front wheel module to remove it from the robot.
2. Pull firmly on the bike to remove information technology from its housing (see illustration beneath).
3. Remove any droppings from within the wheel cavity.
4. Reinstall all parts when finished. Brand sure the wheel clicks dorsum into place.

Important: A front end wheel chock-full with pilus and debris could consequence in damage to your floor. If the wheel is not spinning freely after you have cleaned information technology, delight contact Client Care.

Cleaning the Multi-Surface Brushes

Cleaning the Sensors and Charging Contacts

1. Wipe, sensors and charging contacts with a clean dry material. Y'all can alternatively use a pad of melamine cream to remove built up debris on the robot and Dwelling house Base of operations charging contacts.

iRobot Customer Care

USA & Canada
If you have questions or comments about your Roomba® robot vacuum, please contact iRobot before contacting a retailer. Yous can start past visiting global.irobot.com for support tips, frequently asked questions and data about accessories. This information tin can also be found in the iRobot HOME App. If you need further help, call our Client Care team at (877) 855-8593.

iRobot United states of america Customer Intendance Hours

• Monday to Fri, 9AM – 9PM Eastern Time
  Saturday and Sunday 9AM – 6PM Eastern Fourth dimension

Outside United states & Canada
Visit global.irobot.com to:

• Learn more about iRobot in your country
• Go hints and tips to improve your Roomba® robot vacuum's functioning
• Get answers to questions
• Contact your local back up center

Regulatory Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following 2 conditions: (ane) This device may non cause harmful interference, and (2) this device must accept whatsoever interference received, including interference that may cause undesired functioning.

This device contains a licence exempt transmitter/receiver that complies with Innovation, Science and Economic Development (ISED) Canada's licence-exempt RSS(s). Operation is subject to the following 2 conditions: i) This device may not cause interference, and 2) this device must accept any interference, including interference that may crusade undesired operation of the device.

• Changes or modifications not expressly approved by iRobot Corporation could void the user's authorization to operate the equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. All the same, in that location is no guarantee that interference to radio communication volition not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which tin be determined by turning the equipment off and on, the user is encouraged to endeavor to right the interference past 1 or more of the post-obit measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Telly technician for help.
• Nether Industry Canada regulations, this radio transmitter may merely operate using an antenna of a blazon and maximum (or lesser) proceeds approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be then chosen that the equivalent is tropically radiated power (e.i.r.p.) is not more than the necessary for successful communication.
• FCC Radiation Exposure Statement: This product complies with FCC §2.1091(b) for mobile device RF exposure limits, set forth for an uncontrolled environment and is prophylactic for the intended operation as described in this manual. Per FCC requirements, maintain a distance of more 8 inches (20cm) betwixt any person and the host device (Roomba robot).
• ISED Radiation Exposure Argument: This product complies with the Canadian Standard RSS-102 for portable RF exposure limits, set forth for an uncontrolled environment and is safe for the intended operation as described in this manual. Per ISED requirements, maintain a distance of more than 8 inches (20 cm) betwixt any person and the robot.

For battery recycling get to call2recycle.org; or call i-800-822-8837

©2020 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 United states of america. All rights reserved iRobot, Roomba, iAdapt and Virtual Wall are registered trademarks of iRobot Corporation. Home Base and Dirt Discover are trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance.

Documents / Resources

References

Source: https://manuals.plus/irobot/i3-i4-roomba-robot-vacuum-manual

Share this post